How to Maintain Outdoor Steps Through Perth's Wet Season
Perth's climate is often described as Mediterranean, with hot, dry summers and a concentrated winter rainy season that typically runs from May through September. The city receives most of its annual rainfall of roughly 700 millimetres during these months, and June and July are usually the wettest. For homeowners, this means outdoor steps face several months of repeated soaking, drying, and soaking again. Without proper care, that cycle leads to slippery surfaces, algae growth, cracked materials, and costly repairs. This guide explains how to protect your outdoor steps, keep them safe underfoot, and extend their life through every Perth winter.
Why Perth's Wet Season Is Hard on Outdoor Steps
After months of dry heat, Perth's outdoor surfaces are baked, dusty, and often slightly degraded by UV exposure. When winter rain arrives, the first downpours wash accumulated dust, pollen, leaf litter, and oils onto step surfaces, creating a slick film. Shaded steps on the south side of homes, or those beneath established trees and pergolas, can stay damp for days and become ideal breeding grounds for moss, algae, and mould.
Perth's sandy soils drain well, but they can also shift. Heavy rain may wash away fine sand from beneath paving or around the edges of steps, leading to settling, uneven treads, and gaps. Meanwhile, the temperature swing between hot days and cool, wet nights can cause materials to expand and contract, which opens hairline cracks that let in even more water.
Prepare Your Steps Before the Rain Arrives
The best time to maintain outdoor steps is in autumn, ideally in April or early May, before the first significant rain. Preparation reduces the work required later and prevents small defects from becoming big problems.
Inspect for Damage
Walk over every step and look closely at the surface, edges, and joints. Check for the following:
- Cracked or chipped treads in concrete, pavers, or tiles that allow water to penetrate
- Loose or hollow-sounding pavers or tiles, which indicate a failed bond or washed-out bedding
- Worn or missing grout and mortar between stones, bricks, or tiles
- Rot, splits, or protruding fixings on timber steps and decking treads
- Rust on metal stair components, including nosings, brackets, and handrail posts
- Wobbly handrails or balustrades, which become safety hazards in wet conditions
Repair these issues early. A small crack sealed in autumn costs far less than a section of stairs replaced after winter.
Deep Clean and Reseal
A thorough clean removes the dirt and organic matter that algae feed on. Use a stiff broom to clear debris, then scrub with a pH-neutral cleaner or a product designed for your specific surface. High-pressure cleaning can be effective on concrete, but use it carefully on soft limestone, sandstone, and older pavers, as too much pressure can strip the surface and increase porosity. Once the steps are completely dry, apply a quality penetrating sealer suited to the material. A good sealer reduces water absorption, makes cleaning easier, and slows biological growth. Many Perth homes have limestone or limestone-look finishes, which are particularly porous and benefit greatly from annual or biennial sealing.
Slip Resistance: Your Top Safety Priority
Slips and falls on wet steps are among the most common household accidents, and winter conditions in Perth make them more likely. Steps are especially hazardous because a slip can mean a fall down multiple levels. Improving traction is one of the most valuable things you can do before and during the wet season.
Understand Slip Ratings
In Australia, slip resistance of surfaces is classified under standards such as AS 4586, with ratings like P (pedestrian) and R (ramp) classes. Surfaces with a higher rating perform better when wet. If you are replacing or upgrading outdoor steps, ask your supplier or contractor for the slip rating of the material, and choose a product suited to external wet areas. Polished tiles and smooth glazed finishes are generally poor choices for exterior steps.
Add Traction to Existing Steps
If your current steps feel slick when wet, there are several ways to improve grip without a full rebuild:
- Anti-slip coatings: Clear or tinted coatings with fine aggregate create a textured surface and can be applied to concrete, tiles, and some timber.
- Anti-slip treatments: Chemical etching products slightly roughen certain tile and stone surfaces to improve traction.
- Adhesive grip strips: Applied to the leading edge (nosing) of each tread, these provide targeted traction where feet land.
- Grooved or textured nosings: Fitted to step edges, these improve both grip and visibility.
- Outdoor-rated mats: Use secured, non-slip mats at the top and bottom of stairs, but ensure they are fixed so they do not become a trip hazard.
Manage Moss, Algae, and Mould
Green and black growth on steps is more than cosmetic. Even a thin layer of algae can turn a safe surface into a slippery one. Prevention works better than repeated cleaning, so focus on reducing the moisture and shade that support growth.
Prune overhanging branches to let in more sunlight and airflow. Trim back garden beds that crowd the sides of steps and keep soil from washing onto treads. Sweep steps weekly during winter to remove leaves, which hold moisture and stain surfaces as they decay.
When growth appears, treat it promptly. A soft brush with a diluted outdoor-safe cleaner is usually sufficient for light growth. For persistent algae, a dedicated mould and algae remover applied according to the label can be effective. Always follow product instructions, protect nearby plants, and prevent runoff from entering stormwater drains https://housewashingperth.com.au/tennis-court-cleaning/ where possible. Avoid mixing chemicals, and wear gloves and eye protection.
Material-Specific Care Tips
Concrete Steps
Concrete is durable but porous. Seal it regularly, patch cracks with a suitable exterior concrete repair product, and consider a textured broom finish or anti-slip coating for better wet grip. Watch for spalling, where the surface flakes away, as this suggests water is penetrating and needs attention.
Limestone and Natural Stone
Limestone is common across Perth and can stain easily and absorb water. Use a quality stone sealer, avoid acidic cleaners (which can etch limestone), and clean spills and leaf stains promptly. Replace damaged or crumbling pieces before they compromise adjacent stones.
Pavers and Brick
Check that pavers sit firmly and that joints are filled with polymeric sand or suitable jointing material. Sand washed out by heavy rain should be replaced to keep pavers stable and discourage weeds. Re-lay any sunken or tilted pavers to prevent trip hazards and water pooling.

Timber Steps
Timber is particularly vulnerable to wet-season damage, including rot, swelling, and surface mould. Re-oil or re-coat with a quality exterior timber finish before winter, ensuring the surface is dry and clean. Check that screws and nails are not lifting, and replace corroded fixings with stainless steel or hot-dip galvanised alternatives. Grooved decking boards provide better wet traction than smooth boards. Also check that timber does not sit directly on soil, which accelerates decay.
Tiled Steps
Inspect grout lines for cracks and gaps, as these let water reach the substrate and can lead to tiles lifting. Re-grout with a suitable exterior-grade product and seal if recommended. Replace any cracked tiles quickly.
Drainage: The Foundation of Step Longevity
Water that cannot drain away is the enemy of every step material. Good drainage protects against pooling, erosion, and freeze-free but persistent dampness that fosters decay.

- Ensure each tread has a slight fall (typically about 1 to 2 percent) away from the house so water runs off rather than sitting on the surface.
- Clear gutters and downpipes before winter so overflow does not cascade onto steps.
- Check that nearby drains, grates, and soakwells are clear of leaves and sand.
- Look for areas where water pools at the base of the stairs and correct the grading or add a drainage channel.
- Keep garden mulch and soil below the level of the step edge to avoid sediment washing across the surface.
Many Perth properties rely on soakwells to handle stormwater. If one is blocked or full, runoff may overflow toward steps and entries. A licensed plumber or drainage specialist can inspect and clear these systems if you suspect a problem.
Improve Visibility and Handrail Safety
Perth winters bring shorter days and overcast conditions, so steps are used more often in low light. Good lighting greatly reduces the risk of missteps on wet surfaces. Consider low-voltage LED step lights, solar-powered options, or motion-sensor lighting at entrances. Many modern LED products are energy efficient and inexpensive to run, making them a practical upgrade for 2026.
Make sure handrails are secure, rust-free, and comfortable to grip. Wet or slippery handrails reduce confidence, so choose materials and finishes that remain tactile in the rain. Contrasting nosing strips can also help people distinguish step edges, which is particularly helpful for older residents and children.
Ongoing Maintenance During the Wet Season
Once winter sets in, a simple routine keeps steps in good condition:
- Weekly: Sweep away leaves, sand, and debris. Check for new damp or slippery patches.
- After heavy storms: Inspect drainage, clear blocked grates, and look for signs of erosion or shifted pavers.
- Fortnightly to monthly: Spot-clean any visible algae or mould before it builds up.
- Mid-season: Re-check handrails, fixings, and lighting to ensure everything is functioning properly.
- End of season (September or October): Assess any damage from winter, plan repairs, and schedule resealing or recoating for the drier months.
When to Call a Professional
Some problems go beyond routine maintenance. Contact a qualified landscaper, concreter, carpenter, or paving specialist if you notice:
- Structural cracks wider than a few millimetres or steps that are visibly tilting or sinking
- Significant erosion beneath or beside stairs
- Timber that feels soft or spongy, indicating advanced rot
- Handrails or balustrades that are loose, corroded, or fail to meet current safety requirements
- Persistent water pooling that you cannot resolve with simple cleaning and grading
If you are building new steps or replacing existing ones, be aware that stairs and balustrades are subject to the National Construction Code and local council requirements, particularly regarding riser and going dimensions, handrails, and barrier heights. A licensed professional can ensure the work complies with current standards and is suited to Perth's conditions. Always confirm licensing and ask for references before engaging a contractor.
Protect Your Steps and Your Household This Winter
Maintaining outdoor steps through Perth's wet season is about three things: preparing early, improving safety, and responding quickly to problems. Inspecting and sealing surfaces in autumn, boosting slip resistance, controlling algae, keeping drainage clear, and sticking to a simple weekly routine will keep your steps safe, attractive, and structurally sound. A modest investment of time and money now helps you avoid injuries, expensive repairs, and premature replacement in 2027 and beyond. If you are unsure about the condition of your steps or the best treatment for your material, a local specialist can assess them and recommend a plan suited to your property and budget.
House Washing Perth
(08) 7828 5551
Ends · FELIXVNAA783